how to apply wall decals

Before you start to apply your Graphictank decals, have a good read through these simple instructions and remember:

1. You won’t be able to reposition the vinyl after removing the backing paper, so plan carefully where you are going to put your graphic before doing so.

2. Graphictank decals are not reusable items so please take great care. They can be easily removed but may become damaged in the process.

3. Take care not to damage paintwork when removing vinyls from painted walls - you may find it easier to use a hairdryer which softens the adhesive.

STEP 1

You can apply your wall decals to any smooth flat surface but make sure it is clean of dirt or grit and completely dry. You must leave newly painted walls at least 1 month before applying wall decals.

STEP 2

Some items will be supplied pre-cut but it you may find it easier to trim around the graphic before applying.

STEP 3

It is important to plan the composition carefully. Once you have decided where your sticker is going to be positioned, use masking tape to hold it in place.

STEP 4

Lift graphic and carefully peel the backing paper to half way, making sure all the graphic is on the transfer paper. If the vinyl is stuck to the paper, smooth the paper back onto the application tape until it sticks and then retry.

STEP 5

Move the squeegee over the design at 45 degrees as you apply. Apply in a firm smooth motion so you don't get any air bubbles. Remember vinyl is very sticky, so keep the rest away from the wall whilst you apply.

STEP 6

Wait at least 10 minutes and then peel back the edge of the application tape and remove, pulling slowly and carefully away at 180 degrees to the vinyl. If the vinyl pulls away with the application tape, use the squeegee some more.